Ferro Alloys

Ferro silicon manganese, Ferromanganese, Ferrovanadium, Ferrochromium, Ferromolybdenum, Ferronickel, Ferrotitanium, Ferrotungsten,

Ferro-manganese is used mainly in the steel industry for hardening and desulphurization of steel and as a deoxidizer, making the slag more fluid.

	Mn	C	Si	P	S
FeMn HC	75 % min	6-8 %	1.50 % max	0.25 % max	0.03 % max
FeMn HC Low P	76/78 % min	6-8 %	1.50 % max	0.10 % max	0.03 % max
FeMn MC	80 % min	1.50 % max	1.50 % max	0.20 % max	0.03 % max
FeMn LC	80 % min	0.50 % max	0.50 % max	0.025 % max	0.03 % max

Ferro Silicon Manganese is used as a deoxidizer an alloying element in steel. It can be used as a substitute for Ferro Silicon and Ferro Manganese when added to make different types of steel.

	Mn	Si	C	P	S
FeSiMn 6014	60 % min	14 % min	2.0 % max	0.30 % max	0.05 % max
FeSiMn 6517	65 % min	17 % min	2.0 % max	0.30 % max	0.03 % max
FeSiMn 7018	70 % min	17 % min	2.0 % max	0.30/0.50 % max	0.03 % max
SIZE	10-50 mm / 10-80 mm
PACKING	Bulk or 1 mt big-bag

Ferro Silicon Magnesium is one of the best nodularizers due to its low levels of magnesium oxide and high nodularization . This material is used to modify the graphite flakes in the iron making process.

Ferro Silico Magnesium	Mg	Si	Ca	TRE	La	Al
FeSiMg	5.50 – 6.50 %	43.0 – 48.0 %	0.80 – 1.20 %	0.80 – 1.20 %		0.40-0.80 %
FeSiMgMCa	5.50 – 6.50 %	43.0 – 48.0 %	1.80 – 2.00 %	0.80 – 1.20 %		0.40-0.80 %
FeSiMgHMg	8.00 – 10.00%	43.0 – 48.0 %	0.80 – 1.20 %	0.80 – 1.20 %		0.40-0.80 %
FeSiMgLa	5.50 – 6.50 %	43.0 – 48.0 %	0.80 – 1.20 %		0.35 – 0.45 %	0.40-0.80 %
SIZE	1-10mm / 2-20 mm / 3-25 mm / 6-30 mm and as per customers’ requirements